AUTO air conditioning ac compressor PV8 pulley 24V Compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used

group name: sanden 7 series compressor

Min Order: 1 set

brand name: INTL Auto Air Conditioning Compressor

model: INTL-C129

Nearest port for product export: HUANGPU, SHENZHEN, NINGBO, SHANGHAI

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

Export mode: Have the independent export and import right

update time: Fri, 22 Nov 2024 11:41:59 GMT

contact supplier

Paramtents

Size PACKING : 25*22*19
Type Compressor
Car Make 7h15 universal
OE NO. SANDEN SD709 7H15 SD-709 SD7H15
QUALITY GRADE ONE

Packging & Delivery

28cm x25cm x20cm
Min Order1 set

Briefing

AC Kompresor SANDEN SD709 SD-709 7H15 SD7H15 PV8 pulley universal kompressor air conditioning compressor 24V

Detailed

Specification:

Model number: INTL-C129

Car name: Universal

Compressor Type: 7H15

Clutch:8PK

Volt: 24V

OEM#

SANDEN

SD709

7H15

SD-709

SD7H15

Packaging Detail

0002307011 0002302011 DENSO 7SB16C ac compressor for Benz MB Sprinter GM ZAFIRA Chrysler Crossfire Dodge Sprinter Van

Shipping Detail

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced