Paramtents
Size PACKING : 25*22*19
Car Make SANDEN 7H15 for Case/New Holland/MC/Cormick/Steyr
OE NO. 197121A1 1999755C3 1999755C2 1977959C1 47050714 1990755C3 4478SAN 4609
QUALITY GRADE ONE
type SANDEN 7H15
Packging & Delivery
Min Order1 set
Briefing
Detailed
SANDEN 7H15 for Case/New Holland/MC/Cormick/Steyr 2pk kompressor
Specification:
Model number: INTL-C137
Car name: for Case/New Holland/MC/Cormick/Steyr
Compressor Type: SANDEN 7H15
Clutch DIA: 152mm
Pulley:2PK
Volt: 12V
OEM#
197121A1
RC.600.175
1999755C3
1999755C2
1977959C1
47050714
1990755C3
4478SAN
Sanden:
4609
U4609
4478
AA7H15AA
U4609
Maq/uina Case / New Holland TC5070
TC5070
Car application
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.